mikesmarinefiberglassrepair.com
8705 Steffas rd.
Monroe, MI 48162
United States
ph: 734-654-9238
mikesmar
It's March 5th an John stop out with his Mastercraft some dock rash an deep scratchesFirst thing I had to do was acid wash the bottom an hull too get the yellow strain off the hull 3/5
See the strain 3/5
Pull the boat back in the building an started too remove the decals
missing parts an there are scratches an a couple deep scratches
an this
an this
an I am going too clean up this part is faded 3/5
Faded bad 3/5
scratches on left side
The decals are off this side , now I have too wet sand the scratches off 3/6/20
I did some blocking today an the scratches are gone
I did some buffing on this faded fender 3/6/20 this is the left side
Here is the right side fender , kinda faded ah ?
Buff an polish
Look at that
Repair an buff 3/7/20 I have some repairs in the white
3 repairs here
I have some of these ?
an this one .
An this one , I mix up a color an sprayed it on
Front left side ,
See it ?
color looks close 3/6
I did the body work an sprayed on the gelcoat 3/6 letting it dry for tomorrow
Before
After , faded is gone 3/7/20
Working on making the color
getting closer ?
Damage
I have some deep scratches on the red gelcoat
Getting things ready3/10/20
It just need something more , so I order more pigments that I didnt have until it gets here 3/10/20...... 3/13/20
I mix some new pigments closer
to the color an sprayed it on
Back left side back , letting it dry 3/13/20 looks good
I got it close 3/14
Here a part , I repair an mix the color , see the repair ? 3/14/20
Its buff an polish , looks good 3/14/20
Decals are on , check out that fender ? 3/15/20
All back together an polish for the season 3/15/20
Its 3/28 an Tim stop out woith his 20 ftr Malibu Buff an wax an some repairs
Front damage 3 colors 3/28
Taking things apart .
I have 13 holes on the front half of the boat
This one
Letting all of them dry for tomorrow 3/28/20
I buff the back today , that is a reflection .
Joe stop out with his Yamaha 3/11
I move some boats around
I have the boat in the building tape off an cover working on the side
There is a smashish part that hit hard
I chop it an filled it with fiberglass an let that dry
Block sanded a couple times an re-fill the surface
It got hot in the shop ,
so I shot the black on
Letting it dry until tomorrow 3/12/20
wet sanded an buff
An polish an untape
All done Joe ,I am finish 3/13/20.............................................. Bryan an his fathers boat repair a chip ....................................................
Bryan stop out with a chip 3/11
I did some chopping an fulling an put the corner back on 3/11
getting her closer
Covering an taping
Sprayed the black an letting it dry
I untape some parts , letting it dry
Bryan the corner back on 3/12
Chip is gone 3/12/20......................
I have a 2018 Ranger
With a chip
In 3 colors ............3/15/20
I have it filled an it's dry 3/16
I got the silver on an clear coat is drying 3/16/20
Going to spray the red
Flakes 3/17/20
Letting dry 3/17/20
I have the silver on , than the red ,than the black flakes on , with clear coat over it 3/18/20
I wet sanded an buff too a shine 3/19/20...................................... Shannon an John stop out with their 19 footer
Buff an wax an some repairs 3/21/20
Some fade ah ???
Buffed 3/22/20
See the fade 3/21/20
faded
I straighten out the end of the decals 3/21
I did some buff today 3/21/20
Look at that shine ??? 3/21/20
Before 3/22/20 straightening the edge
straighten out the edge
I am buffing the boat too get ready too mix some white close too the color or a match 3/22/20
Buffed
Going too started working on the touch ups 3/22/20 Body work 4 spots
I chop and filled an sanded flat and smooth an tape off 3/23
I mix up some white with this or that and the color is close 3/23/20
I wet sanded an surface and buff too a shine , holes are gone . 3/24 Body work
4 to 5 chips on the edge
Wet sanding
Buff too shine 3/24/20
Front bottom right side 3/23
The other side front 3/23
Not bad , close
See it . 3/23/20
I finish buffing the front deck 3/24/20
Buff to the shine 3/24/20
Wet sanding an buffing 3/25/20
See the corner is back on , and gelcoat , wet sanded an buff the surface . 3/ 25 /20
Wash the boat an clean the inside 3/26/20
I clean the swimplatform
The wood burner is drying the swimplatform 3/26/20
Oil 3/27 an wax the hull
Shannon an John love my job the buff an wax . And the repairs . All good have a great summer guys ....................................The Malibu
I have the malibu buff an I am working on the repairs , mixing the color 3/30
The corner back on an I have a color mix up
See my repairs ? 13 holes of old snaps ...
I sprayed all 13 teen spots an front repair
I un tape the surfaces an I am letting it dry 3/30
I had this edge chips repair also , sprayed an letting it dry 3/30
Copyright 2017 mikesmarinefiberglassrepair.com. All rights reserved.
mikesmarinefiberglassrepair.com
8705 Steffas rd.
Monroe, MI 48162
United States
ph: 734-654-9238
mikesmar