mikesmarinefiberglassrepair.com

On the 3th of September I started Thomas boat at Brest Bay MarinaI have a little repair 9/3And he say , Tom says , there are some scratches on the front of the hull , ???So I started will some wet sanding the hull and repairing the bottomI have the surfaces wet sanded an buff 8/3 an marks the repairs .This corner was all chip up wet sanded and buff 9/4See the chips are gone . 9/4Yes I have the bottom repair and body work an I think the gelcoat is on the hull  9/4Hole gone , Bottom is painted , an the color looks good I found some chip on the front of the hull , so I sprayed some more gelcoat for tomorrow morning 9/4 I wet sanded the repair an buffWaLa hole is gone , the chips an scratches are refinish an the side is shiney again ............9/5/2019

Kyle's Glastron Holes an spider cracks fiberglass repair an refinishing.............. chop off the spider cracksanother spot fiberglass an block 9/12An this one , look its was repaired before , thats filler between the gelcoat an fiberglass 9/12Resin , matted , body work an alot of blocking , flat an smooth 9/13Refinish , an the hole an spider cracks are gone ,9/14The back hole is repaired an refinish 9/14The old repairs , from times before me , repaired an the color looks close also 9/14 I buff an polish this side today an the right side looks good an my mix color looks pretty close . 9/ 14 / 2019Where the old top mount was ,The back view where the hole was an spider crack was , repair and refinish 9/15/2019I did a snap repair 9/15Back together  . . . . I wet sanded the gelcoat , and buff the surface an put the snaps back on 9/15The hole , spider cracks an the color looks good too me . The right side is back together 9/15/2019Here I am wet sanding the left side repairs 9/16Wet sanding with a block , I will soon be buffing the side 9/16/2019BuffBuff an shiney , now clean up an pinstripping done 9/17/2019There goes Kyle he is very happy how his boat turn out 9/18.2019...........................................Jim drop off his Tidewater 22 ftr ., For the end of season Buff an wax an a repair 9/21/2019What color is that ???My madness 9/22Body workA little of this an some of that an ISprayed letting it dry 9/22 Sunday . . . Needs a little buff an wax 9/21/2019Some marks and scratches an rub spots ....So I started buffing anBack part after polish 9/22/2019Back of hull 9/22Right side back buff an polish 9/22I wash the boat today an buff this side an back smooth 9/23/2019I have the top deck buff an thisFrom the front too the back I have this boat buff an washed twice  9/24/2019 wax the boat , Done an back with Jim , Thank you Jim for the work . . . .

I started a 25 footer at Brest Bay Marina I took off  the old rud rail , an got the new part , an went back too my shop and made it , too cut new parts , 9/3   I had another job too work on in the morning . The 25 footer has some scatches on the side . I did some work on the side . 9/4 I cover the boat on a semi windy day unreal 4 rolls of tape too told it down . 9/5   I got my air compresser an tank , and my gun . and the painted an I shot itSo I untape and uncover the boat , and I thought it was going too rain today 9/5/2019 at  Brest Bay Marina  Yes its the MacGregor Sailboat an that is the owner Mike , It's 9/8/2019 I got the boat too the marina on the 9/7 an I had half of the bottom sanded before we got too the narina . Now we have the whole bottom sanded an repaired an ready too put 2000-2001 primer coat on this bottomWe started coating the bottom 9/8Mike an myself have 4 coats on an she looks good . I am letting this dry 9/8/2019Today Mike an myself have 3 more coats of 2000-2001 on  , 7 coats of 2000-2001 barrer coats no more blister on this sailboat 9/9/2019VC-17 9/10 letting it dry for one dayI got Chris at Brest Bay too leave the boat in the hoist as me and the owner of the boat help . 9/12All done back on the trailer 9/12/2019A other view , but done 9/12/2019U thought we was done , no no no I have this Glastron 2006 sitting at my shop waiting for me too started my next job ,9/8/2019 I had too remove the pinstripping an order newold pinstripping I knocked the wooden blocksCheck it out , I cover the boat before I started doing workedKyle wants some old repairs fix also , nice ah ?I buff the side too get it clean for a color mixing . 9/8 I have the boat cover , tape an paper off an  now too buff 9/8Well its a good started on this job , better save some for tomorrow 9/8/2019touch up ?6 extras touch ups on this job 9/9/2019Back right side repairs and refinish 9/12/2019These 2 holes on the front 9/12another one air void 9/9another air void from the factory 9/9/2019 9/14/2019 refinishI put 6 layers of matting over that holes on both sides Fiberglass resin an matting 9/9/2019 letting it dryI mix up a color today , Looks close 9/11/2019.......................Starting on my next boat I took off the decal on the side I have some touch ups in the white 9/19/2019One here One up here , a small chip 9/19an there is 3 or 4 chips threw out this corneran one here . I try too mix a colorThere that looks closer 9/20/2019doing some repairsome over here .I have a lot tape up an cover 9/20/2019Here a scratch that I am going too wet sand flat an smooth Buff too a shine 9+/24/2019Boat and trailer is cover 9/20/2019BEFOREAFTER I wet sanded the scratches an chips off I buff the plastic 9/21/2019There was 7 to 8 chips an scratches repair an refinish 9/22There was a chip here ....There was scratches across here gone wet sanded an buff them offWet sanded the chip I repair an sprayed yesterday . Shiney now an the color looks good too 9/22All buff an polish 9/22/2019beforeAfter 9/23Cover for the next part of this job 9/24/2019I have some scratches on the side too repair or wet sand off 9/24I am block sanding with wet or dry paper the scratches off the side flat and smooth 9/26scratches are off , now too smooth the surfaces to buffI got the scratches off  , wet sanded off , now too smooth the surfaces 9/27 Blocking all dayI have some touch ups 9/28 Sprayed the black on an letting it dry 9/28Block sanded flat and smoothAn it Sunday I am done for the day 9/29/2019Buff an polish 9/30Done all clean up , an ready to go 9/30/2019