mikesmarinefiberglassrepair.com

Heading too Brest Bay Marina today with the 18 ft Nitro .Get it off the trailer too finish the repairs .6/4/2019First I cover the top 6/6/2019I work on all the white repairs today I got the scratches an chips filled an sanded 6/6/2019I started by wet sand an buff both sides 6/7An the bottom frontPolish bottom front Buff an polish  6/7 I went to lunch and started tapingTape off front noseSprayed gelcoat this morning 6/8/19All tape off an cover, but it got too windy to spray gelcoat , maybe that is why God created tomorrows ?Both side are sprayed also 6/8/19I started wet sanding an buffed my sprayed surfaces I got the left side shiney . looks like new ! Decals are on . Both sidesI got the front done an than it rain again oh rain , rain go away come again another day  6/9I try too wet sanded a scratch off an I went threw the gelcoat , so close Leroy 6/10/19See just like this , wet sanded threw , so today I sprayed the white gelcoat an watch it dry , because it rain in the morning , all morning an it look cloudy out one of them look dark , 6/10 its dry now an tomorrow I will finish this Nitro.....DONE 6/11/19Done 6/11/19All done an back on the trailer an gone 6/12/19 ....................

Dave stop out today with his sailboat 6/4Just a little fadedFaded a buff an wax 6/4Today I wet sanded the faded black 6/5Buff an wax 6/7I did some buffing today 6/6 .I got about ten feet done today 6/6getting shiney  .......I buff some more on this sailboatWas gray now black 6/7Shiney now......Right side...This is the left side before.Left side..6/7/2019Was gray now shiney Black Left side top 6/8/19Left side before ,,,,,,,,,,Check that out 6/11/196/22/19 this what the road looks like now , Finzel rd got Black top yaaaaaaaaaaaaaa an Dave got his sailboat                       There he goes , 6/22/19 too the water

I started on Kirk Ranger fender  this afternoonFirst I chop it an fiberglass it .6/4Than I cover the boat an tape it offThan I did the body work 6/4Than I black it off , cuz that is how the factorys do it , or it will not match 6/4Than I put the factory flake on Than I clear coated the surface an untape it , letting it dry 6/4I letted it dry fore 2 days . Than I wet sanded it an buffed it, an put it back together 6/6/2019 .. . . .. . I have a 20 ft . boat come outThat needs an acid wash first . 6/12/19Check that outSo I got suited upI am ready 6/12/19Scrubb an scrubban wa laNow I can repair the damage on the bottom 6/12CleanOther side , clean . I put the boat in the building same day .There are 3 spots here , The front bottom 2 spotsan 2 chips on the side , so I was doing some body work an got all the spots ready for gelcoat an shot them all 6/12/19Letting the gelcoat dry too wet sanded an buffed tomorrowRefinish an done 6/14Refinish an done 6/14Refinish wet sanded an buff , done 6/14Refinish with gelcoat wet anded an buff , done 6/14Finish  . . . . .  6/14/19.............I am starting another boat its from Lockmans Hardware an Marine in Detroit Michigan a Tuffy boatIn the shop , going too start soon 6/14The owner put a screw threw the hull on both sides.Their are small  ,but right in the front middle of the hull 6/13 I did some body work keeping it small an sprayed gel coat onLetting both side dry 6/14I wet sanded the surfaces an buff too a shine , perfect , nice .6/15I have 2 other spot on the Tuffy this one on the back corner an one on the left side fenderI did the body work just like the hull , keeping them  small , repaired , flaked , an clear coat with gel coat an letting it dry , the next day I wet sanded them an buff , looks good 6/15It is 6/25 an Dave brought me his Range trailer with damageSo I chopped the brake an fiberglass , than I did some body workI have it all sanded an ready for the black , an than the silver pinstrip lineTomorrow6/26/19  I will wet sand this an tape it off an put the top on .A little of this a little of that6/26/19 wet sanded an buff ... All 3 colors are on there ...The crack is gone .............6/26/19