mikesmarinefiberglassrepair.com

Yes I am still working on Tims Malibu Corner is back on 3/30 thanI have a pretty good color that I mix up an sprayed on 3/31 letting it dryToday 4/1 /20 I sprayed the dark red . Letting it dryMix up a color 4/3/20Tape off an sprayed the gelcoat on an untape an let it dry 4/3/20 Buff an wax13 Snaps are gone 4/4/20Back together an wash , putting the snaps back on 4/4/20

I had a Quickie , a 2013 TahoeDuane has a chip he want fix 4/10A little of this an a little of thatI sprayed the gelcoat on , an letting it dry 4/10I wet sanded an buff the spot 4/11/2020The chips are gone , who's next .................I started on Ron s boat a 2013I am heat gunning the surface 4/26Fiberglass an resin repair 4/26So I block sanded the surface an sprayed the black than flake , than clear gelcoat on and let dry 4/27-28Ready too wet sanded an buff 4/29Finish , Done ...............4/29/20

I started Jonathans MasterCraftI am going to clean up the swimplatform an oil itLooks good  4/9/20Fiberglass an repair the damage 4/7/20Glass letting it dry4/7/20Sanded flat filled , block an filled , 4/8/20There I have a color mix 4/8/20Finish the body work an sprayed on the color I mix 4/9check that out ? pretty close , mix or match Let this dry 4/9/20So I wet sanded an buff this morning 4/10/20Check that out Jonathan an I got the teak clean an oilWooooooow Look at that 4/10/20..............................Terry stop out with his 35 years old Boston Whaler . I buff the hullI have touch ups 4/16The front hand rails are gone an I am repairingHoles an crackstouch upsRefinishRefinish 4/17A couple of chips gone 4/18Front repair 4/19Sprayed gelcoat on , 4/20Refinish 4/21Washing the boat after I buff it , 4/22Washing Terry look at your boat ,she is clean 4/22 I put the boat back in the building to dry , an wax her up .clean an wax up 4/23Done ready too go.........