mikesmarinefiberglassrepair.com

Jeff stop out with his Grady White that Lake Michigan roll overI acid wash the yellow stain off Remove the stripe and the Mc and the numbersBuff cleanand the blue tape is where the touch ups are at 9/4/21A clean archor locker Covering the trailer 9/5/21Covering and moving back this too .....Taking apart and tapeing off .....Both sides ...........I chopped off the cracksI took the rub rail off the back and both sidesMore chopping ..........Stress cracks...........9/5/21chopping off the stress cracks 9/6/21back bottom cornerGrinded the side and fiberglass and let dry 9/7/21

I have some touch up yet too finish upTouch up smooth an non-skid9/19 /21 letting the gel-coat dry 9/19/21I have the hatches back on 9/20/21Buffung an polishing , and I found a couple more touch ups ...........9/20/21

Good Evening , ya I am getting the Grady White , repairs ready for gel coatingSome CHIPSSS Getting closer 9/9/21We have a corner again .and this one on the front top corner gunneland this one 9/9/21more spots and making ready for gelcoatA chip on the front corner repair and refinish 9/10/21I mix up some gel coat and sprayed it on 9/10/21This one on the front bow hull , a chip ???I sprayed this also with 13 other small touch ups across the top deck of the boat .  9/10/21Touch up  9/11/21Touch upTouch upTouch upI wet sanded the spots and buff 9/11/21Corner is back on 9/12/21Gel coated letting it dry , I mix a color and that looks good.....9/12/21The corner is back on , repair and refinishI been wet sanding the scratches off the side and buffNice an smooth now 9/13/21I pull the screws out an caulked the seam and bolted the deck too the hull ........9/14/21 Getting things ready too sprayed the gunnels.... I sprayed the gel coat I mix , 9/15/21Here some screws that are from the rub rail part that was smash.... I acetone the surfaceI wet sanded and buff the surfaces . Here is the blends at 9/16The front part of the gunnelYes I got the rub rail back on this side and I been buffing and polishing the surface on this side...9/16/21Buff an polishother side buff and polishMC numbers are on 9/18/21Putting the decals on ,Without a stripe/After , now letting it dry Check out the reflection 9/25/21Wax 9/26Repair and refinish and new decals 9/26Polish and wax 9/26