mikesmarinefiberglassrepair.com

          In 2008       I was contact by Bass Pro to repair small chips , scratches , an service damage that sometime happens at all shops . their had to do some welding , which burn the surfaces , an need new paint on a aluminum fishing boat I tape off the surfaces , an put zink-cro-mate primer its like a self etching primer for aluminum .I got the color too match an I spray it on . heading back too Bass Pro ..

Hello , ya its Mike I started at Bass Pro in Rossford Ohio today 2/20 Starting on a MakoI cover an tape off the repairs needed too be doneTape an paper repairsRepairing chips an scratchesRepairs an set up work too gelcoat A couple cracks on the swimplatform  . .There was a couple cracks across the top of this ??? So I started today an got some close done repairs an fiberglass repair . Letting it dry for tomorrow. . I am wet sanding some of the repair too buff them too shine .  A repair in the corner 2/21reinforce this swimplatform 2/23I sprayed gelcoat on the top 2/23 letting it dry too wet sand an buff tomorrowother sidewet sanded flat an buff................another repair from Bass Pro 8/10 /2017 ........I started this touch upA chip on the front an a scratch 8/30I wet sanded the surface too repairscratches . . . . . Getting the color onGelcoats on . letting it dry too wet sand this an buff A new boat with some touch upsRepairChip repairCorner repairAnother corner repair 10/4/2017I have all 4 spots repair and refinish 10/5 working on the hullSpider crack on the hull  . . . . . . . .Repair an I sprayed the gelcoat on , letting it dryWhere the spider crack was .All wet sand flat an smooth an buff too a shine 10/6/17I have another Mako too repair scratcheswet sanded flat an smooth 10/24/2017Scratches are gone 10/25/2017chiptouch up on the corner 10/27Inside jamb crackswet sanded an buffback together .I had the boat ready an I saw this , right on the front of the boat , so I fix it 10/28Refinish chip is gone 10/28/2017

Bass Pro threw out the yearsMy first Bass Pro Job it was a touch uphere a Nitro candy apple red flake repairrepaired sprayed in gelcoat an blended inA small repair in gelcoatA other small repair in the front bow of the whiteA Mako with repairs on the aft deck in the backA small repair in the silver flake on the lower corner .beforeIts Black Cherry now  . . . . Tahoe 3/20 .Bass Pro touch ups 3/21One on the floor Crack .Touch ups .Touch ups .Non-skid touch ups .set up the non-skid repair Doing some body work touch upsA chip by this light repair an refinish 3/22Repair an refinish4 to 5 repairs threw out the top near the windsheildclean an back together 3/22Refinish . .wet sanded an buffall clean up getting the boat ready to ship 3/23niceback together flat & smooth .3/24All done who"s next . . .A new weekend 9/1some chips on the bottom .smash offSo I have it repaired .repaired an sprayed in gelcoat 9/2Wet sanded an buff too a shine 9/3 Bass Pro its ready for Tuseday . . .I have some white gelcoat laying on the blue , needs too be wet sanded off an bufff 9/22Straighting out some lines , I wet sanded the side , too get the smaller scratches off the side of the hull 9/23buff too a shine .RepairsRepairsSpider cracks . . . 9/22I have some repairs on this dash area . And refinish . . . . . . . Tape off an ready for gelcoat 9/26Repair .Repair .Repaired an gelcoat 9/27/2017Repairs .Refinish .9/28/17All clean up 9/29.17Look at that shine . 10/1/17 finish . . . I started another job from the Bass Pro Shop 10/11/17First a air void that was 4 inches longOops the non skid is on the smootha small chipan on te back there is over tape or the line isn't straight .The hull was scratches on te left side I wet sanded the side an buff itLooks like glass now an it's BlackLook at that you can see the wood burner an the wood behind it what a shine 10/17/17........Spider cracks repairsMore repairs for Tracker Boat Centerwas scratches across this hull . I wet sanded an buff too a shine that looks like glass